Merging Anubis SPS
Brand: Merging
MERGING+ANUBIS is a ground-breaking new audio interface incorporating the Swiss expertise of
Merging Technologies in analogue and digital, networked audio and DSP technology. More
significantly, it offers unique features to any engineer or musician looking for a compact AD/DA
unit with the quality you would expect from Merging, and a fully featured monitor controller that
integrates with any DAW.
MERGING+ANUBIS was designed in Switzerland, where it is assembled and tested to the same
exacting standards as our complete line of professional products and is intended to deliver the
same high level of performance and reliability.
Merging Technologies in analogue and digital, networked audio and DSP technology. More
significantly, it offers unique features to any engineer or musician looking for a compact AD/DA
unit with the quality you would expect from Merging, and a fully featured monitor controller that
integrates with any DAW.
MERGING+ANUBIS was designed in Switzerland, where it is assembled and tested to the same
exacting standards as our complete line of professional products and is intended to deliver the
same high level of performance and reliability.
KEY FEATURES
▪ Modular by software. Evolving long life product with multiple missions (upcoming)
▪ Merging class of its own sound quality
▪ Ethernet with RAVENNA interface allows asynchronous data transfer with computer audio
systems and allows cable runs up to 100m with Cat5e/Cat6 cable
▪ Standalone or central part of a highly scalable and expandable network. Multiple
MERGING+ANUBIS or RAVENNA/AES67 compliant interfaces can be connected to the
network and Anubis can remotely and locally: Control, Mix, Monitor multichannel content
and route those I/O’s.
▪ Full 32 bit signal path from analog Input to Output, via Mixer
▪ TFT LCD capacitive multi-touch screen
▪ Web based remote control accessible via smartphone, tablet or computer.
▪ Rotary Control knob allowing easy adjustment of volume level. The rotary knob provides
also access to comprehensive and intuitive menu within the Anubis software
▪ FPGA-based DSP mixer with effects with ultra-low latency for the performer foldback/Cues
11
▪ Up to 4 x 128 x 8 Mix engines
▪ Redundant power supply with PoE and DC Power Supply
▪ SMPTE 2110-30 support: Audio transport is built on AES67 uncompressed 48kHz PCM
audio. Up to 8 channels can be bundled in one stream,16- and 24-bit depth are supported.
▪ SMPTE 2110-10 support: PTP v2 (IEEE 1588)
▪ ST2022-7 Support with new Anubis SPS (Seamless Protection Switching) and as of
firmware 1.1.X and above.
▪ NMOS Support as of firmware 1.1.X and above
Microphone Preamplifiers
▪ Unprecedented audio transparency with a Dynamic Range (A Weighted) of 139 dB Typical
▪ 48V phantom power, Low cut filter, Pad and Boost, Phase inversion, Stereo Linking, Lock
and Cut features
▪ Dual Gain 32 bit AD circuitry
▪ Huge Dynamic Range with ample headroom
▪ Totally clickless Gain steps
▪ Split Channel feature
▪ Possibility to independently control FOH & Monitoring Microphone Gains without any
conflict
▪ Possibility to cut input signals to FOH while monitoring it from other outputs (e.g.
Headphones) for signal check by example.
▪ Possibility to record duplicate of the input channel at a different input gain level (for
backup or peak-safety recording)
Instrument/Line inputs
▪ Two Instrument/Line inputs on front panel. Can be used for Hi-Z instruments or Line inputs
▪ Dynamic Range (A Weighted) of 136 dB Typical
▪ Independent gain levels for Instrument or Line inputs
▪ Dual Gain and Split channels feature as above
Monitoring
▪ Two Individual stereo main balanced XLR outputs with mono, dim, mute, level control and
mixing possibilities. Can be used for Main monitor set
▪ Two Individual stereo main balanced TRS outputs with mono, dim, mute, level control and
mixing possibilities. Can be used for auxiliary monitors of additional Cue Mix
▪ Two independent headphones sockets with independent level control
▪ Two exceptional high-power headphone amps with dedicated DACs
▪ Mute switch for any outputs
▪ Adjustable Max, Ref, Dim levels
▪ Crossfeed for headphones. Recreate the stereo image heard from speakers by mixing
some signal from the left channel into the right channel, and vice versa
▪ Instant access dedicated soft buttons
Monitor Mission Specs
▪ The remote allows control of volume level and source selection of any Merging
RAVENNA Device on the network
▪ In the Box and Expandable I/O through Hapi, Horus or any RAVENNA/AES67 devices
▪ Up to 8 Monitors capable of up to 22.2 (maximum 32 channels)
▪ Up to 128 Sources capable of up to 22.2 (maximum 128 channels -2 dedicated to
Talkback)
▪ Up to 256 channels Analogue, MADI, AES3, SPDIF, Pro Tools HD I/Os via
RAVENNA/AES67
▪ In-the-box I/O pairing management with Merging devices
▪ Any other RAVENNA/AES67 devices pairing using ANEMAN
▪ Down-mix selector (from mono to 22.2)
▪ Sources trim (exclusive and sum) selector
▪ Bass management
And more:
▪ Power-over-Ethernet supplied: IEEE 802.3at compliant
▪ GPIO general-purpose input/output for studio (e.g. Record light control) or live (e.g. Foot
switch)
▪ MIDI input and output for conventional digital sources
▪ Connects from/to the computer using standard ASIO on Windows, Core Audio on Mac or
ALSA on Linux
▪ Mic stand mount
▪ Kensington security slot
▪ Built-in talkback microphone for communication and recording, possibility for 2
independent Talkbacks
▪ 18 Save/Recall Internal Presets and unlimited external Presets Save/Recall.
▪ Mic/Pre DAW remote control
▪ Standalone operations. Anubis can serve as a multi-channel analog converter or
headphone amp when disconnected from the computer.
▪ Built-in Room Correction support for SoundID (Sonarworks)
▪ Access control: Protect settings and other parameters with a password
Pošljite povpraševanje
Polja označena z * so obvezna!