The Reverb 2016 is built to reverb – it’s not a multi-effects box. It was designed from the perspective that reverb is used nearly always and warrants a dedicated box with an optimal user interface. The Reverb 2016 user interface is extremely easy-to-use, unbelievably cool and features dedicated controls for each of the effect’s parameters. The controls and display are intuitive. The panel controls are optimized for the studio and for live performance. Up to 99 user presets can be stored. While recreating the original reverbs is the Reverb 2016’s raison d’etre, it also features brand new, enhanced versions of the originals. These “New” reverbs are not a breakthrough: they have the same basic structure of the originals but with more complex early reflections, higher density, and finer control of the parameters. The “New” reverbs represent the natural evolution of the development work that maxed out the array processing power of the SP2016.

 

Reverb 2016 Features
6 Reverb effects and a dedicated user interface
Recreates 3 original SP2016 reverb effects Stereo Room
Room Reverb
High Density Plate

3 new enhanced versions of the originals
Fast top level UI (one knob - one job) optimized for studio and live performance
Stores up to 99 user defined presets.
Digital input/output (S/PDIF)
Input kill switch, relay bypass switch
Dual function footswitch input
>98dB dynamic range
24 bit conversion
MIDI in & out
20 Hz - 20 kHz +/-1dB
Pro levels (+4 dB nominal) and connections (XLR and 1/4”)
Balanced/unbalanced input selection via rear panel, push button switch
Universal internal power supply works anywhere Reverb 2016 Specifications: Audio Input Connectors
1/4” T/R/S phone jacks (2)
XLR 3-wire balanced (2)

Impedance
+4dB/Bal switch position: 100kOhm
-10dB/Unbal switch position: 50K Ohms

Levels
+4dB/Bal switch position:
-2dBu min for full scale
+20dBu max

-10dB/Unbal switch position:
-14dBu min for full scale
+8dBu max

Audio Output Connectors
1/4” T/R/S phone jacks (2)
XLR 3-wire balanced (2)

Impedance
125 Ohms, each side, balanced

Levels
+18dBm max, full scale, balanced/unbalanced

Digital Input/Output Digital Input
Digital S/PDIF Input
Sample Rate: 44.1kHz – 48kHz (downsampled to 40kHz)
Connector: Coaxial, RCA type
Digital Input is selected via front panel switch.

Digital Output
Digital S/PDIF output
Sample Rate: 44.1kHz or 48kHz with ext clock
Connector: Coaxial, RCA type
Digital output is always active at 44.1 kHz when not using digital input Frequency Response Dry 20Hz-20kHz, +/-1dB
Wet 20Hz-16kHz, +-1dB

Dynamic Range >90dB
20 Hz - 20 kHz, Non A-weighted

Sample Rate 40.0 kHz

Conversion 24 Bits A/D, 24 Bits D/A

Environment Operating temperature: 32° to 104°F (0° to 40C)
Storage: –20° to 170°F (–30 to 75°C)
Relative humidity: 95% non-condensing

Throughput delay Less than 2 ms

THD <= .05% , 20Hz - 20kHz

Crosstalk <= 45dB below full scale

Dimensions Width 19”
Depth 6”
Height 1.75”
Weight 9.5 lbs

 

 Eventide Reverb 2016