AMT - M40 - The M40 is a bold new direction for microphones incorporating integrated circuit technology, an interchangeable chip which allows for multi-purpose use, and emulates many popular microphones with the advantages of its ultra compact size. The M40 has been designed for piano but works equally well in other applications such as boundary layer micing (conference, stage).

AMT - Roam 1 Elite - The AMT Roam 1 Elite Microphone has a flexible gooseneck, Gold Isolation Ring where the microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The "Universal Clamp" which allows for use with 40 or more instruments. The clip portion of the clamp is used for flanged bell instruments such as brass and woodwinds. The clip joins the remaining parts of the clamp for use with many other instruments including clarinet and flute.

AMT - S18C - The S18C is an electret-condenser microphone that has been designed for cello. All of the mic'ing parameters that are problematic for string instruments have been addressed. To be able to get the most gain before feedback it uses a very tight pattern to give a high rejection to surrounding noise, at the same time reproducing accurately the subtleties of the cello.

AMT - S25B - The SP25B is the same microphone as the S25B however uses the “super pre-amp” which has 2 XLR outputs, one of which has a ground lifted isolation transformer split. A quarter inch line driver output with volume control is also included. The pre-amp runs off of battery, phantom power, or optional power supply.

AMT - SP25B - The SP25B is the same microphone as the S25B however uses the “super pre-amp” which has 2 XLR outputs, one of which has a ground lifted isolation transformer split. A quarter inch line driver output with volume control is also included. The pre-amp runs off of battery, phantom power, or optional power supply.

AMT A95-4C - The A95 is an ultra-miniature, low profile condenser microphone specifically designed for drums and percussion.

AMT ERT - The ERT is designed specifically for the needs of hand percussion players. This new mic addresses some challenges hand percussionists have long been faced with, such as reproduction of subtle low frequencies, mic placement, durability and noise handling.

AMT LS - The LS is a low profile condenser microphone that attaches to the bell with a LOW MASS clip, specifically designed for all brasses and the saxophone family.

AMT P800 - The AMT P800 is a low profile condenser microphone that attaches to the trumpet "OFF THE BELL". The microphone provides pure tonal reproduction while being unobtrusive.

AMT Roam 4 - The AMT Roam 4 Guitar Microphone has a flexible gooseneck, 2 point Isolation Ring where the microphone is suspended reducing valve, key, click, and handling noise. The special flute clamp is designed to keep the weight down while being small yet very solid on the instrument.

AMT S15G - The S15G is a low-profile condenser microphone that has a cardioid pattern which gives it better gain before feedback than most guitar microphones on the market.

AMT S3G - The S3G is a unique, low-profile condenser microphone that can only be used with an acoustic guitar that has a sound-hole under the strings.

AMT TA2 - The AMT TA2 is a low profile double condenser microphone that attaches to the bell with a low mass clip specifically designed soprano saxophone. The microphone provides pure tonal reproduction while being unobtrusive.

AMT VP3 - Applied Microphone Technology, based NJ had introduced the VP3. A three microphone setup for Vibraphone and mallet instruments.

AMT VS - The VS is a ultra miniature, feather weight low profile condenser microphone specially designed for the Violin, Viola, and Mandolin.

AMT WS - The WS is a low profile double condenser microphone that attaches to the clarinet, alto and bass flute, or oboe with a Ultra- miniature low mass clamp.

AMT Z1 - The AMT Z1 hardwired single microphone made for flute. Formally the Z7. The Z1 is the perfect choice from soft to louder playing applications.