20. Maj, 2010
Buy Mytek 8X192 AD/DA and get through June 30, 2010 FREE Protools® HD Card ( 699€ value!!! ) več...
24. Marec, 2010
Eighteen months ago, DPA Microphones unveiled its brand new 4099 clip mic range, which has proved to be a success with musicians worldwide. The range has now been expanded with two new additions: the 4099B and 4099C, with mounting accessories designed specifically for bass and cello respectively. več...
17. Marec, 2010
Napredne tehnološke rešitve, natančen odziv na hitre zvočne tranziente, linearen in v ekstremih razširjen frekvenčni obseg, neutrudljivo poslušanje pri visoki glasnosti ter koherentna zvočna slika pri zelo nizkih jakostih; to so samo nekatere od dobrot, s katerimi so nam postregli francoski mojstri. več...
08. Marec, 2010
Alcons introduces a reference-quality sound reproduction system with fully matched loudspeaker, processing and amplifier components. It is designed to offer the most realistic (surround) sound-for-picture reproduction possible, making it the ideal choice for high-end home theatre theatres, Digital Cinema mix/screening rooms, post-production facilities, dubbing stages and quality-conscious cinemas with less than 100 seats or room depth less than 15m/45ft. več...
02. Februar, 2010
Native Instruments is proud to announce a new cooperation with the legendary recording studio, Abbey Road. več...
Alcons introduces “line-array on a stick“

The Alcons LR7 micro line-array system can be deployed in a wide variety of applications. Now, the new BRK5LR7 extends the versatility of the LR7 micro line-array system even further: With this swivel yoke, no less than up to five LR7 cabinets in stand-configuration and up to seven LR7 cabinets in flown configuration can be stand or truss mounted.

Truly unique feature of this yoke-mounting solution is that full curving functionality is maintained, herewith enabling a complete pole-mounted full-sized line-array system.

Both the 5 unit and 7 unit configuration can be connected to one single ALC amplifier channel, for a very efficient system lay-out.
The yoke is connected to the middle cabinet with two connecting plates on the side of the cabinet, secured with two quick-release pins each. The connecting plates are attached to the yoke with conical joints, clamped by elegant, unobtrusive knobs.

As the stand-fitted array always moves within its centre of gravity range, it is a very simple, thus quick procedure to set-up and adjust the array.

The bracket has been certified with up to seven cabinets, under a safety rating of 10:1 and all within a standard tripod stand’s load limit. The bracket can be fitted with an optional truss clamp, TV-spigot or stand-mount adapter, depending on requirement. All additional mounting peripherals can be connected with M10 bolt/nut combination, in the three-hole lay-out of the bracket.



Nazaj
Če želite sprejemati obvestila o novostih vpišite vaš e-mail: