Barefoot Sound MicroSUB

Barefoot Sound MicroSUB

The MicroSUB uses the renowned Barefoot dual opposing driver format to achieve uncompromising, extremely linear deep bass extension. Reaching down to 22 Hz, the sealed cabinet design rolls off at 1/4 the rate of ported subs, revealing deeper bass information with far better transient response.
Furthermore, while ported subs lose damping and stability at subsonic frequencies, the MicroSUB's damping actually increases. This innovative 2-way mid-bass/sub system, having precise extension up to 2 kHz, offers a great deal of flexibility. As a dedicated LFE monitor, the MicroSUB can readily reveal unwanted high frequency content in channel 6.
In Satellite/Subwoofer arrangements, a pair of MicroSUBs can seamlessly transform even tiny monitors a into a powerful full-range system. Compact cabinets and near-zero vibration allow great placement flexibility as well. Place them on the floor, mount them on stands, place them on the meter bridge close to the monitors, whatever works for your application! The cabinet can be oriented either vertically or horizontally using the included pedestals (9" L x 1 3/8" W x 2 1/4" H). Topping off the uncompromising nature of the MicroSUB, a discreet 1 dB stepped attenuator level adjustment is incorporated.

Specifications

  • Description:  2-way active sealed-box subwoofer with extended bandwidth
  • Subwoofer Input Controls:  stepped attenuator level adjust (+6dB to -16dB), mid/sub amplifier mutes, +10 dB gain
  • Crossover Controls:  120/80/60Hz frequency select, crossover In/Out
  • Input Impedance:  50k Ohm
  • Bass Response:  -3dB @ 22Hz, Q = 0.707, Slope = 12 dB/octave
  • Pass Band Response:  26Hz - 1.6kHz (+/- 1.5dB), -3dB upper cutoff at 2kHz
  • Cabinet:  32 liters total internal volume, sealed sub enclosure, sealed midbass enclosure, machined aluminum front baffle plate
  • Midbass Crossover Frequency:  95Hz
  • Midbass:  5" poly cone, sealed rear waveguide enclosure
  • Midbass Power:  250W
  • Dual Subwoofers:  10" aluminum cones, 1" peak-to-peak linear excursion
  • Subwoofer Power:  500W
  • AC Power Input:  nominal 115 VAC or 230 VAC selectable
  • Power Consumption:  idle 30W, maximum 675W
  • Speaker Weight:  65 lbs. each (30 kg)
  • Shipping Weight:  73 lbs. each (33 kg)
  • Dimensions HxWxD:  20.5 x 9.5 x 15.25 inches (521 x 241 x 387 mm)

Pošljite povpraševanje

Polja označena z * so obvezna!