Buzz Audio ARC-1.1

Buzz Audio ARC-1.1

Brand: Buzz Audio
The ARC1.1 is a outboard channel strip combining a mic/line preamp, equaliser, compressor and limiter in one box. It has primarily been designed for recording and processing the human voice and sports a host of features that have been inspired by suggestions from audio professionals from around the globe.
The ARC includes tried and trusted elements from other Buzz Audio products plus some new innovations specifically developed for this unit. Whilst aimed at vocal recording and processing, the ARC is a useful tool for all sorts of recording and mixing applications. With all the connection and routing options available, the ARC may be used as a seperate Mic Preamp, DI Box, Equaliser and Compressor/Limiter (optionally with sidechain EQ), all at the same time.

Specifications

Main Path Frequency Response (measured without EQ, Comp/Limiter or Tranny switched IN)

Mic Input to Mic Direct Out - 3Hz to 400kHz (-3dB)
Mic Input to Main Out - 4Hz to 400kHz (-3dB)
Bal Line Input to Main Out - 3Hz to 250Khz (-3dB)
Bal Line In with Tranny selected - 12Hz to 100kHz (+/-1dB),+5 @ 250Khz, -3dB @ 400Khz
Instrument Input to Main Out - 9Hz to 300kHz (-3dB)

External Path Frequency Response

Compressor External Path (no Limiter) - 5Hz to 250kHz (-3dB)
Compressor External Path (with Limiter) - 5Hz to 80kHz (-3dB)
Equaliser External Path (with all EQ zeroed and no HPF) - 5Hz to 200kHz (-3dB)

Total Harmonic Distortion

Mic Input to Mic Direct Out - 100Hz=0.005% 1kHz=0.005% 10kHz=0.015%
Compressor External Path (no Limit, no GR) - 100Hz=0.01% 1kHz=0.004% 10kHz=0.006%
Compressor External Path (with Limit, no GR) - 100Hz=0.01% 1kHz=0.01% 10kHz=0.02%
Compressor External Path (10dB of GR @ 20:1, Release at16, +10dB Make Up Gain)
- 100Hz=0.15% 1kHz=0.15 10kHz=0.18%
Limiter in External Path (10dB GR, Release Slow) - 100Hz=0.2% 1kHz=0.08% 10kHz=0.18%
Bal Line Input to Main Out - 100Hz=0.0015% 1kHz=0.001% 10kHz=0.001%
Bal Line Input to Main Out with Tranny - 100Hz=0.3% 1kHz=0.05% 10kHz=0.015
Instrument Input to Main Out - 100Hz=0.08% 1kHz=0.025% 10kHz=0.025%

Noise (all measured A weighted ref to 0dBu = 775mV RMS)

Mic Input (65dB gain, 150 ohm source impedance) -71dBu (EIN 132.5dB)
Bal Line In (10dB gain, 150 ohm source impedance) -95dBu
Unbal Line In (10dB gain, 0 ohm source impedance) -100dBu
Compressor External Path (no Limiter) -90dBu
Compressor External Path (with Limiter) -80dBu
Equaliser External Path (no cut/boost) -90dBu

Levels (0dBu = 775mV RMS)

Maximum Mic input level = +14dBu
Maximum Bal Line input level = +23dBu (+33dBu with -10dB Pad engaged)
Maximum Unbal Line input level = +10dBu
Maximum Output level (all outputs) = +23.5dBu

General

Power requirements 115V/230V selectable on rear panel
Dimensions 2U rack mount, 300mm deep

Pošljite povpraševanje

Polja označena z * so obvezna!