Grace Design FELiX 2

Grace Design FELiX 2

Brand: Grace Design
Studio Quality 2 Channel Acoustic Preamp / EQ / DI

Released 6 years ago, FELiX helped usher in a renaissance of amplified acoustic sound quality and functionality. What once required racks of studio gear and stage techs to achieve, FELiX made available in a single, affordable and rugged /compact floor unit. Since its release, we have worked together with many demanding players to improve and hone its features and functionality, and are now pleased to announce the latest version of this little champ – FELiX2.
Open, musical and detailed instrument and mic preamplification for discerning artists and engineers
2 channel audio path with blend output control
m101 style transimpedance microphone preamplifier, no electrolytic capacitors in the signal path
Variable Phase control on channel to for fine tuning phase between a microphone and pickup
Ultra precision 0.5% thin film resistors are used in the signal path
Careful power supply design and grounding yield an ultra-quiet signal path and professional level headroom and line driving ability
Fully ground isolated DI outputs with high quality, low distortion, fully shielded transformers
Super rugged 1/4” connectors with heavy duty metal bushings
New side rails to protect control from inadvertent changes via cables or feet
Powerful, independent EQ on both channels – hi and low shelving and full parametric midrange
Mid frequency control has two ranges 70-880Hz / 670 – 8kHz
20Hz-1kHz sweepable HPF on both channels, can also be set as notch filter
A / B footswitch for multiple instrument configurations or soloing different pickups
Mute/ tune footswitch mutes all outputs except dedicated tuner out
Boost footswitch for variable 10dB level boost (global)
DI outputs sources are configurable – Ch1 (mix or Ch1) Ch2 (mix or Ch2)
Dedicated level controlled stereo stage amp output (configurable as blend or Ch2)
Dedicated tuner out, remains hot when unit is muted
Side panel switches for 48V, phase, mid Hz range select, HPF/notch select, 12V and A/B mode select
12V mic input power available on Ch2
Phase reverse switch for each channel
3 input impedance settings on each channel – Ch1 10K, 1MEG, 10MEG / Ch2 332K, 1MEG, 20MEG accommodating a wide range of pickup types
Mic stand flange mount screw holes holes for putting FELiX on a mic stand
1/8” stereo headphone jack, active when FELiX is muted
Stereo FX loop or independent dual mono FX loops
NEW CLASS II Universal 100-240 AC power supply with standard IEC cable
Full 5 year transferable warranty / built for long, happy life on the road
Designed and built by family and friends in Lyons, CO, USA

Specifications

GAIN RANGE (INPUT TO DI OUTPUT)

CH1 Mic input 21-62dB
CH1 Instument input Low Gain: 3-44dB
                        High Gain: 21-62dB
CH2 Instument input -1.5-36.5dB
Boost 0-9dB

THD+N, 1KHZ, 22HZ-22KHZ BW (MIC INPUT TO DI OUTPUT)

@ 20dB Gain +10dBu out <0.0045%
@ 40dB Gain +10dBu out <0.0050%
@ 60dB Gain +10dBu out <0.010%

INTERMODULATION DISTORTION – SMPTE/DIN 4:1 7KHZ/50HZ (MIC INPUT TO DI OUTPUT)

@ 40dB Gain +10dBu out <0.05%

NOISE – REFERRED TO INPUT CH1 MIC @60DB GAIN 22HZ-22KHZ BW

50Ω source <-128dB

CMRR @60DB GAIN

100Hz >55dB
1kHz >75dB
10kHz >75dB

FREQUENCY RESPONSE (INPUT TO DI OUTPUT)

Mic input @ 40dB Gain -3dB 20Hz – 65kHz
Inst input @ 20dB Gain -3dB 20Hz – 65kHz

I/O IMPEDANCE

CH1 Mic Input 8.1kΩ
CH1 Inst Input HI: 10MegΩ
                MED: 1MegΩ
                LOW: 10kΩ
CH2 Inst Input HI: 20MegΩ
                MED: 1MegΩ
                LOW: 332kΩ
Insert Input 10kΩ
DI Outputs 150Ω
Amp, Tuner, Headphone and Insert Outputs 150Ω

SIGNAL / PEAK LED METER

Green Threshold -10dBu
Red Threshold +10dBu

MAXIMUM INPUT LEVEL

CH1 Mic 0dBu
CH1 Inst Low Gain: +21dBu
                High Gain: 0dBu
CH2 Inst +20.5dBu

MAXIMUM OUTPUT LEVEL – 100K OHM LOAD, 0.1% THD

DI Outputs Line: +20dBu
                Mic: -6dBu
Amp, Tuner, Headphone and Insert Outputs +22 dBu

HIGH PASS FILTER / NOTCH FILTER

High Pass Filter 20Hz – 1kHz @ -12dB/octave
Notch Filter 20Hz – 1kHz, >-35dB, Q>1.0

EQ

Gain +/- 12dB
Low Frequency Low Range: 125Hz Shelving
                High Range: 250Hz Shelving
Mid Frequency Low Range: 70Hz – 880Hz
                High Range: 670Hz – 8kHz
Mid Frequency Q 0.5 – 5
High Frequency 2kHz Shelving

OUTPUT NOISE 22HZ-22KHZ BW @ MIN GAIN

CH1 MIC Input (50 ohms) to DI Output <-88dBu
CH1 Inst Input to DI Output <-88dBu
CH2 Inst Input to DI Output <-98dBu

EXTERNAL FOOTSWITCH

MUTE (TIP) Momentary – Normally Open – Switch to GND < 10Ω
BOOST / TOGGLE (RING) Momentary – Normally Open – Switch to GND < 10Ω

POWER CONSUMPTION

100-240VAC 50/60Hz 10 Watts Max

WEIGHT AND DIMENSIONS

3.2lbs, H3.0” x W9.5” x D5.5”


Pošljite povpraševanje

Polja označena z * so obvezna!